Δημοσιεύθηκε την — Σχολιάστε

Computer Case Inter-Tech S-3901 IMPULSE RGB

Dimensions (h/w/d) 505 x 215 x 455mm
Height CPU cooler (max.) 175mm
Length graphics card (max.) 275mm
USB 3.0 ÷ 2
USB 2.0 ÷ 2
Microphone ÷ 1
Headphones ÷ 1
Front 3x 120mm or 2x 140mm (optional)
Rear 1x 120mm (serial, RGB, 6pin connector)
Top 2x 120mm or 2x 140mm (optional)
Weight net = 6.78kgs
gross = 8.04kgs

Δημοσιεύθηκε την — Σχολιάστε

Computer Case Inter-Tech C-3 SAPHIR RGB

Dimensions (h/w/d): 450 x 205 x 435mm
Height CPU cooler (max.) 150mm
Length graphics card (max.) 345mm
USB 3.0 1x
USB 2.0 2x
Microphone 1x
Headphones 1x
Front 2x 120mm (optional)
Rear 1x 120mm (serial, RGB, 6pin connector)
Top 1x 120mm or 1x 140mm (optional)
PSU-tunnel 2x 120mm (optional)
Weight net = 4.66kgs
gross = 5.49kgs

Δημοσιεύθηκε την — Σχολιάστε

Pci to 4 +1 usb Logilink PC0041

Compliant with PCI Specification Rev. 2.2
32bit PCI Bus interface
Support PCI IRQ sharing
Automatically selects IRQ & I/O Address
Fully Plug & Play
Supports Windows 98SE/ME/2000/2003/XP/Vista/7
USB 2.0 Interface
External port: 4 x USB 2.0 Type
Internal port: 1 x USB 2.0 Type
Compliant with USB 2.0/1.1 Specification
Data transfer rate: High Speed 480Mbps,
Full Speed 12Mbps and Low Speed 1.5Mbps
supported

Δημοσιεύθηκε την — Σχολιάστε

Adapter ide to sata Logilink AD0005B

Connect an IDE hard drive to a SATA controller
Compliant to Serial ATA 1.0 standard
Up to 1.5Gbps transfer rate
Supports up to UDMA/133 Drives
Plug and Play installation
Compatible with most of Serial ATA controller
Connector: 1 x IDE40 pin, 1 x SATA 7 pin connector and 1 x 4 pin power
Package Contents:
1 x Serial ATA-to-IDE Converter
1 x Y-splitter Power Cable
1 x SATA Cable
1 x Quick User Guide

Δημοσιεύθηκε την — Σχολιάστε

Adapter sata to ide Logilink AD0006A

Serial ATA 1.0 Specifi cation compliant
Automatic Serial ATA 3.0/1.5 Gbps speed negotiation
ATA/ATAPI PIO mode 0 to 4
ATA/ATAPI Ultra DMA of transfer rate 16.7/25/33/48/66/
100/133/150MB/s.
Support Serial ATA hot-plug
Ultra low power consumption
Work for both AC and DC couple between the transmitter
and the receiver
Provide specifi ed OOB signal detection and transmission
SATA II Asynchronous Signal Recovery support.
Support Partial/Slumber power management
Master/Slave support
Working environment: 0 ~70 degrees celsius

Δημοσιεύθηκε την — Σχολιάστε

Card Reader Logilink CR0001B

Compliant with USB 2.0/1.1 specification
Hot swap allow you to detach USB device
without rebooting your system
Allow data exchange in different sockets
Sockets:
1. Compact Flash (CF) Series
2. XD Series
3. Memory Stick (MS) Series
4. Secure Digital (SD) Series incl. SD-HC + MMC
5. Micro-SD
Low power consumption-powered from the system
Supports high-speed (480 Mbps), full-speed (12 Mbps),
and low-speed (1.5Mbps) data transfer modes
Ideally use with digital cameras, palmtop PCs,
handheld PCs, PDAs, voice recorders,
MP3 players and other mobile electronics
Supports Windows 98SE/ME/2000/2003/XP/Vista/7