Compliant with PCI Specification Rev. 2.2
32bit PCI Bus interface
Support PCI IRQ sharing
Automatically selects IRQ & I/O Address
Fully Plug & Play
Supports Windows 98SE/ME/2000/2003/XP/Vista/7
USB 2.0 Interface
External port: 4 x USB 2.0 Type
Internal port: 1 x USB 2.0 Type
Compliant with USB 2.0/1.1 Specification
Data transfer rate: High Speed 480Mbps,
Full Speed 12Mbps and Low Speed 1.5Mbps
supported

Connect an IDE hard drive to a SATA controller
Compliant to Serial ATA 1.0 standard
Up to 1.5Gbps transfer rate
Supports up to UDMA/133 Drives
Plug and Play installation
Compatible with most of Serial ATA controller
Connector: 1 x IDE40 pin, 1 x SATA 7 pin connector and 1 x 4 pin power
Package Contents:
1 x Serial ATA-to-IDE Converter
1 x Y-splitter Power Cable
1 x SATA Cable
1 x Quick User Guide

Serial ATA 1.0 Specifi cation compliant
Automatic Serial ATA 3.0/1.5 Gbps speed negotiation
ATA/ATAPI PIO mode 0 to 4
ATA/ATAPI Ultra DMA of transfer rate 16.7/25/33/48/66/
100/133/150MB/s.
Support Serial ATA hot-plug
Ultra low power consumption
Work for both AC and DC couple between the transmitter
and the receiver
Provide specifi ed OOB signal detection and transmission
SATA II Asynchronous Signal Recovery support.
Support Partial/Slumber power management
Master/Slave support
Working environment: 0 ~70 degrees celsius