Posted on Leave a comment

Wireless CPE 150Mbps 2.4GHz Outdoor Tenda O3

Model: O3
Dimension: 270*94.86*67.5mm
Deployment: Pole Mount
Application Scenarios: WISP CPE, Data transmission and Long range video surveillance
Frequency: 2.4GHz
Maximum wireless speed: 150Mbps
Interface: 2*10/100Mbps Ethernet Port
Antenna: 12dbi
Antenna Beamwidth: Horizontal: 60° Elevation: 30°
Reset Button: 1
GND Terminal: 1
Power Consumption: 4.3W
Waterproof Level: IP64
LED indicator: PoE/LAN,LED1,LED2,LED3
Power Method: 12V1A Passive PoE
Lightning Protection: 6000V
Passive PoE power supply: Passive power over ethenet via PoE/LAN ( 4,5pins -7,8pins)
Voltage range: 11-13.8V DC
Reception Sensitivity: MCS0: -96dbm
MCS7: -72dbm
Operating mode: AP/Station/WISP/P2MP/WDS Repeater/Router
Standard&Protocol: IEEE 802.11b/g/n
Enable/Disable Wireless Radio: Support
SSID Hidden: Support
Wireless Client isolation: Support
SSID Isolation: Support
Client Limitation For SSID: Support
Wireless Access Control: Support
Weak Signal Client Limitation: Support
Transmit Power: Adjustable power by 1dBm
WMM Capable: Support
APSD Capable: Support
Wireless Security: 64/128 WEP,WPA-PSK,WPA2-PSK,WPA&WPA2-PSK,WPA,WPA2
Transmission Media: Support
VLAN Tagging for SSID: Support
DHCP Server: Support
VPN Pass-through: PPTP,L2TP
Remote Web access: Support
Schedule Reboot: Support
Page Timeout: Support
Ping Watchdog: Support
Network Diagnoses: Ping, Traceroute, Signal Scan
Time&Date Setting: Support
Firmware Upgrade: Support
Backup/Restore Configuration: Support
Username Managerment: Support
Managed By Controller: PC Software — CPE Assistant
Package Content: 1*5km Point to Point Outdoor CPE
1*Power Adapter
1*PoE Injector
2*Plastic Staps
1*Quick Installation Guide
TemperatureOperating Temperature:-30? ~ 60?
Storage Temperature:-40? ~ 70?
HumidityOperating Humidity:10%~90% non-condensing
Storage Humidity:10%~90% non-condensing
Default SettingsDefault login IP:
Default Login Username:admin
Default Login Password:admin

Leave a Reply

Your email address will not be published. Required fields are marked *